Media Bottles
Bellco Glass, Inc. Anaerobic Media Bottle, 1000mL
Type 1 class a Borosilicate glass that are designed for maintaining anaerobic conditions. Useful for studies involving methane-producing bacteria, cell culture, drug discovery, and research and development. MADE IN THE USA.Specifications: Size: 1l Dimensions: 100mm OD x 215mm OAH. Neck Dimensions: 19.7-20.2mm OD, 13.3-13.6mm ID. Grad. Range: 100mL-900mL, every 100mL. Neck Finish: #20 Alum Seal Neck. Supply with #20 Septum Stopper & Alum Seal.
Triforest Enterprises 60ML Sterile PET Media Bottle with tamper evident cap
Our line of Square Media/Packaging PET bottles are specifically developed with contents in mind. They are ergonomic, clear, leakproof, sterile, particulate matter free, and ideal packaging containers. The bottles are compatible with all, automated/semi-automated, high-through-put, filling, capping, and packaging equipment. The foot print maximizes the surface area/volume ratio to improve the efficiency of all filling operations. The bottles have volumetric molded-in graduation marks for reference filling. They are supplied as endotoxin free, nuclease free, and gamma sterilized SAL 10-6 with natural color caps. The bottles are also available with custom cap configurations along with tamper evident and standard closure. They are pacakged in a multi-layer elastomer barrier for clean room operations. Bottles are manufactured using FDA approved resin.
Bellco Glass, Inc. Media Bttle W/Blue S/Cap,1L Schott
Manufactured from Type 1 Class A Borosilicate Glass. These media storage bottles are chemically resistant ans stable. They are suitable for storage as well as for mixing and sampling. They are autoclavable and have white graduations and marking spot. . On sizes 100-200mL there is a full capacity line. These bottles include a linerless blue polypropylene cap and pouring ring. DIMENSIONS: 101mm X 225mm TALL
Foxx Life Sciences Autofil Sterile Polystyrene (PS) Media Storage Bottles with SECUREgrasp GL45 Cap, 250mL, 24/CS
1171-RLS: Media Bottle, 250 mL, PS, Sterile. Foxx Life Sciences' Polystyrene Media Bottles have been designed specifically for Life Science researchers to store common solutions such as tissue culture media, serum, and buffers. Our bottles are designed to handle full vacuum, and can be used with the Autofil filtration system. Our Polysytrene bottles are used for general purpose cell culture aqueous solutions. Each Autofil bottle has features that improve the handling of the bottle, especially when the bottle is wet. The narrow bottle shoulder, combined with the molded finger grips, improves the ability to securely grip the bottle with gloved hands. Our patented, SECUREgrasp bottle cap enables easy handling and carrying of the bottle. The innovative cap also allows for easy uncapping, tightening, and bottle stacking and provides a large surface for bottle labeling. Foxx Life Sciences' Autofil is manufactured in ISO 13485 clean room in North America.
Sigma Aldrich Fine Chemicals Biosciences PyrexR round media storage
These heavy duty 2 L PYREX round bottles can be used for storage as well as mixing and sampling. They include a linerless one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring.. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. -A wide range of optional caps are available for these bottles -Polypropylene colored caps in a choice of orange green purple red and light gray for ease of sorting and identification. -Vented membrane cap with 0.22 mum PTfE hydrophobic membrane. -Red PBT (polybutylene terephthalate) solid caps and ETfE pouring rings for dry heat sterilization (180C). -PBT caps with silicone septa for syringe sampling or introduction of reagents.
CELLTREAT Scientific Products 150mL Solution Bottle, Sterile
CELLTREAT Scientific Products 150mL Solution Bottle. Compatible with bottle top filters or for use as solution storage containers. Solution bottle neck size is 45mm. Curved bottle design for easy handling. RNase/DNase free and non-pyrogenic. Every csae is printed with the lot number for quality traceability. Polystyrene bottles are packaged sterile, individually wrapped, 24/case.
Chemglass Life Sciences 2-Port Assembly for 15L & 36L VSA Vessels Only, Complete
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Med Vet International JorVet Pet Grooming Kit , J1612, Each
JorVet Grooming Kit High-performance grooming kit in an attractive, hangable, zippered blue pouch. Kit Contents: • Large combo brush • Medium universal slicker w/rotating pin rack comb • Self-cleaning undercoat rake - 15 teeth • Fur coat comb trimmer • Plastic flea comb • Grooming mitt & scissors • Face rack comb • Tick picker • Small nail trimmer • Mini nail scissors Dimensions: 12.56"L x 9.76"H x 3.62"D J1612 JorVet Grooming Kit
Chemglass Life Sciences Siphon Assembly ONLY, for 2, 000mL Media Bottle
Siphon Assembly ONLY, for 2,000mL Media Bottle. Replacement part for 50143181 (2,000mL media bottle). Siphon assembly consists of stainless steel siphon pipe and silicone tubing cut to length. All stainless parts are manufactured from 316L stainless steel electropolished to a 20Ra or better finish. The silicone tubing is peroxide cured and meets 21 CFR 177.2600 material specifications.Assembled, the media bottle with siphon assembly allows the user to create precisely the desired dip tube angle to retrieve virtually all of the contents of fluid from the bottle.
Chemglass Life Sciences 2-Port Assembly for 6L VSA Vessels and 5L Media Bottles, Complete
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.